- Joined
- May 15, 2015
- Posts
- 1,338
- Likes
- 130
- Points
- 258
Bouncers in roll-up bouncer-tamer. I have 2, one ahead of the windshield, one behind. They have 4 pockets. I have 1/2, 3/4 1oz, and 2oz and try not to mix them. I labeled the pockets with a sharpie.
I have snaps in the 3700 boxes I keep #5 and #7 Shad-Raps in as that's my 2 most commonly used baits and they're nearly always out.
I keep a few plastics in "Tackle Wallets", basically large heavy-duty zip-locks in a zip-up nylon pouch. 4-Gal Sterilite totes for "back stock".
I'm lazy about spinners, I buy the Scheels pre-tied in 12 or 25pk w/quick clevis and have a Plano box full of different size, shape, color blades.
I was at a loss for jigs so I googled, "Jig Storage" and found someone had cut pipe insulation down into chunks that fit into a 3700 Plano then stuck the jigs into the foam. I label the top of each slot with a sharpie and draw a line until the weight changes. If I remember correctly the foam pieces are 1.25" tall each, sorry, I can't remember what the inside diameter of the foam. Not my idea, I full-on pirated this one.
That jig box work as good as it looks after a few years of use?