Reply to thread

Message

<blockquote data-quote="H82bogey" data-source="post: 125054" data-attributes="member: 1372">UPDATE:So&nbsp; I double checked everything this weekend.&nbsp; Shot the single bevel, the exodus, and my field tips.&nbsp; Made some mirco adjustments to the arrow rest etc.The exodus was 2-3&quot; left at 20 yards before I adjusted the rest.&nbsp; This is when I made the micro adjustments to the rest and everything was still left.&nbsp; So I double checked my field points, they were now shooting left.&nbsp; Which makes sense since I moved the rest.&nbsp; So just to be sure I re-paper tuned the bow.&nbsp; I think I finally figured it out.&nbsp; I moved the rest a full two line markers and it is now punching perfect holes.&nbsp; The only think I can think of is either the last time I paper tuned it, I messed up.&nbsp; Even though it was punching perfect holes, I must have either been shooting at the wrong angle to punch clean holes, or my rest moved between then and now.&nbsp; I think I now have a good baseline to start from and that the bow is in tune.&nbsp; I double checked all cams, timing, strings etc.&nbsp; The bow should be ready to go.&nbsp; I will have to re-sight in this week, but I should be able to get everything back on track.&nbsp; I would have done it yesterday, but I shot in the 3D event at Nishu and ran out of time to sight the hunting bow.On a positive note, I did shoot my personal best in the even.</blockquote>

[QUOTE="H82bogey, post: 125054, member: 1372"] UPDATE: So I double checked everything this weekend. Shot the single bevel, the exodus, and my field tips. Made some mirco adjustments to the arrow rest etc. The exodus was 2-3" left at 20 yards before I adjusted the rest. This is when I made the micro adjustments to the rest and everything was still left. So I double checked my field points, they were now shooting left. Which makes sense since I moved the rest. So just to be sure I re-paper tuned the bow. I think I finally figured it out. I moved the rest a full two line markers and it is now punching perfect holes. The only think I can think of is either the last time I paper tuned it, I messed up. Even though it was punching perfect holes, I must have either been shooting at the wrong angle to punch clean holes, or my rest moved between then and now. I think I now have a good baseline to start from and that the bow is in tune. I double checked all cams, timing, strings etc. The bow should be ready to go. I will have to re-sight in this week, but I should be able to get everything back on track. I would have done it yesterday, but I shot in the 3D event at Nishu and ran out of time to sight the hunting bow. On a positive note, I did shoot my personal best in the even. [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA