Reply to thread

Message

<blockquote data-quote="guywhofishes" data-source="post: 74595" data-attributes="member: 337">if the head bobbing up/down happened on a digger they were doing it wrong. Head is completed supported and rotation is prevented too. The clamp/tensioner is adjustable - so you get it just tight enough to be secure which causes some flexing of the auger but not enough to bend.You will not regret a Digger unless your auger is something odd with a head shape that can't be supported for some reason I can't envision.in this pic the head is snuggled up against the auger flight stem support closest to you. I wrapped velcro fasteners around the head anti-prevention plate that sits a few inches under the auger flight stem support. The head rotation support is vertically adjustable so you can raise/lower up against the head gently to &quot;trap&quot; the head to prevent rotation.The clamp grabs the stem really close to the head - just a couple inches down.[ATTACH]3763[/ATTACH].- - - Updated - - -[ATTACH]3764[/ATTACH]</blockquote>

[QUOTE="guywhofishes, post: 74595, member: 337"] if the head bobbing up/down happened on a digger they were doing it wrong. Head is completed supported and rotation is prevented too. The clamp/tensioner is adjustable - so you get it just tight enough to be secure which causes some flexing of the auger but not enough to bend. You will not regret a Digger unless your auger is something odd with a head shape that can't be supported for some reason I can't envision. in this pic the head is snuggled up against the auger flight stem support closest to you. I wrapped velcro fasteners around the head anti-prevention plate that sits a few inches under the auger flight stem support. The head rotation support is vertically adjustable so you can raise/lower up against the head gently to "trap" the head to prevent rotation. The clamp grabs the stem really close to the head - just a couple inches down. [ATTACH=CONFIG]3763._xfImport[/ATTACH]. [COLOR="silver"][SIZE=1]- - - Updated - - -[/SIZE][/COLOR] [ATTACH=CONFIG]3764._xfImport[/ATTACH] [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA