Reply to thread

Message

<blockquote data-quote="guywhofishes" data-source="post: 114203" data-attributes="member: 337">You need:Elmer's Carpenter's Wood Filler in Golden OakMagic EraserU-40 Cork SealerClean the cork with the Magic Eraser.Remove any loose cork or old filler with a pick.Apply the wood filler to any holes or imperfections in the cork.It usually takes two coats of filler, more for deep holes.Sand lightly, 1st with 120 grit, then 220 grit.Mask off the blank and reel seat.Apply U-40 cork sealer with a small art brush.One coat will do.Figure an hour for each rod, including dry time.They come out better than new.- - - Updated - - -p.s. stolen off the interweb - looks legit to me- - - Updated - - -upon reflection I have some rods with cork grips that have been abused I am going to try this technique sorry rods, I'll try to do better in the future</blockquote>

[QUOTE="guywhofishes, post: 114203, member: 337"] You need: Elmer's Carpenter's Wood Filler in Golden Oak Magic Eraser U-40 Cork Sealer Clean the cork with the Magic Eraser. Remove any loose cork or old filler with a pick. Apply the wood filler to any holes or imperfections in the cork. It usually takes two coats of filler, more for deep holes. Sand lightly, 1st with 120 grit, then 220 grit. Mask off the blank and reel seat. Apply U-40 cork sealer with a small art brush. One coat will do. Figure an hour for each rod, including dry time. They come out better than new. [COLOR="silver"][SIZE=1]- - - Updated - - -[/SIZE][/COLOR] p.s. stolen off the interweb - looks legit to me [COLOR="silver"][SIZE=1]- - - Updated - - -[/SIZE][/COLOR] upon reflection I have some rods with cork grips that have been abused I am going to try this technique sorry rods, I'll try to do better in the future [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA