Reply to thread

Message

<blockquote data-quote="Lycanthrope" data-source="post: 266414" data-attributes="member: 562">So I picked up this motor fairly cheap, thinking about how I can turn it into a super sized blender to break up the fish this spring, if the tank holds together over winter. Theres a fair amount of alcohol in the solution so hopefully it doesnt crack during the cold weather. any ideas, tips or tricks to making this work?[ATTACH]41013[/ATTACH]If I can get a coupler to fit the shaft and an extension that is 2ft or so, all Id need to do is get a blade of sorts attached to it to do some serious blending I think. maybe a 10 or 12 inch saw blade, with some of the teeth bent up or down to lift the liquid might work, or else a square of steel (not sure what size would be appropriate for that HP motor in a viscous liquid) with the corners bent slightly and maybe sharpened a bit, would work also... once I get the fish broken up, a trash pump should work well to distribute the fertilizer where it needs to go.</blockquote>

[QUOTE="Lycanthrope, post: 266414, member: 562"] So I picked up this motor fairly cheap, thinking about how I can turn it into a super sized blender to break up the fish this spring, if the tank holds together over winter. Theres a fair amount of alcohol in the solution so hopefully it doesnt crack during the cold weather. any ideas, tips or tricks to making this work? [ATTACH=CONFIG]41013._xfImport[/ATTACH] If I can get a coupler to fit the shaft and an extension that is 2ft or so, all Id need to do is get a blade of sorts attached to it to do some serious blending I think. maybe a 10 or 12 inch saw blade, with some of the teeth bent up or down to lift the liquid might work, or else a square of steel (not sure what size would be appropriate for that HP motor in a viscous liquid) with the corners bent slightly and maybe sharpened a bit, would work also... once I get the fish broken up, a trash pump should work well to distribute the fertilizer where it needs to go. [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA