Reply to thread

Message: <blockquote data-quote="1lessdog" data-source="post: 340102" data-attributes="member: 6971">I have had 6 custom rifles built in the last 5 yrs.22-6MM AI with 1 - 14 twist. Shooting 50 gr Blitzkings 4280 fps. I hold on fur out to 475 yds6MM BRX with 1 - 8 twist. Shooting 107 Sierra matchkings6MM AI with 1 - 13 twist. Shooting 55 gr Blitzking 4200 fps.260 Rem with 1 - 8 twist. Shooting 120 gr Matchkings6.5 x 284 with  1 - 8 twist. Shooting  140 GR Sierra BTHP, I have two of these.They have either a Brux or Kreiger barrel. All built by machinist not a gunsmith. And I couldn't ask for anything better. The work is good and fast turn around. I have  Lee Gardner thread and install barrels and chamber. I use Remington 700 action. Here is a break down of a custom build from Lee.Action 450.00Barrel 350.00 - 400.00Thread and fit and chamber any caliber 275.00Stock 300.00 - 500.00Scope I run Burris 4.5 x 14 x 42 scope for hunting rifles.To me what makes a custom rifle is  Barrel and how it is fitted to action and the chambering. Everything else you can put on any other rifle and it may or may not shoot good. You can put a 200.00 trigger on and a 500.00 stock and 1000.00 scope and it still may not shoot as good as you would want. And to get most rifles to shoot good you have to load your own shells.Stock beddedTriggerscope</blockquote>