Reply to thread

Message

<blockquote data-quote="lunkerslayer" data-source="post: 488346" data-attributes="member: 217">To&nbsp; do a job like this you should really have another person help you, because you can rent a laser rotary level and have it completed in one day. As long as you dont need to fill areas or cut more then 6 inches it can be done. To calculate your slopes distance x percentage of slope. the best is to use a tape measure, paint and hubs to get your gradesGrade Setting Framework&nbsp;Rotary Level: Projects a 360-degree reference beam.Grade Rod &amp; Receiver: Detects the laser beam accurately.Hubs (Wooden Stakes):Marks permanent physical reference points.Marking Paint: Visualizes boundaries and high/low areas.Tape Measure: Calculates precise horizontal distances.Slope CalculationFormula: \(Horizontal\ Distance \times Target\ Slope\ Percentage = Elevation\ Drop\)Example: For a 50-foot run at a 2% slope (\(0.02\)):\(50 \times 0.02 = 1\ inch \) total elevation drop.Step-by-Step ExecutionSet Benchmark: Establish a fixed master elevation point.Drive Hubs: Place stakes at the start and end points.Read Laser: Record the benchmark height using the receiver.Mark Cut/Fill: Calculate the difference against your target slope.Limit Depth: Ensure cuts and fills stay under 6 inches.Paint Lines: Connect the stakes to guide the operator.You really need another person davey</blockquote>

[QUOTE="lunkerslayer, post: 488346, member: 217"] To do a job like this you should really have another person help you, because you can rent a laser rotary level and have it completed in one day. As long as you dont need to fill areas or cut more then 6 inches it can be done. To calculate your slopes distance x percentage of slope. the best is to use a tape measure, paint and hubs to get your grades Grade Setting Framework Rotary Level: Projects a 360-degree reference beam.Grade Rod & Receiver: Detects the laser beam accurately.Hubs (Wooden Stakes): Marks permanent physical reference points.Marking Paint: Visualizes boundaries and high/low areas.Tape Measure: Calculates precise horizontal distances. Slope CalculationFormula: \(Horizontal\ Distance \times Target\ Slope\ Percentage = Elevation\ Drop\)Example: For a 50-foot run at a 2% slope (\(0.02\)):\(50 \times 0.02 = 1\ inch \) total elevation drop. Step-by-Step ExecutionSet Benchmark: Establish a fixed master elevation point.Drive Hubs: Place stakes at the start and end points. Read Laser: Record the benchmark height using the receiver.Mark Cut/Fill: Calculate the difference against your target slope.Limit Depth: Ensure cuts and fills stay under 6 inches. Paint Lines: Connect the stakes to guide the operator. You really need another person davey [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA