Reply to thread

Message

<blockquote data-quote="lunkerslayer" data-source="post: 388206" data-attributes="member: 217">[MEDIA=youtube]CfCqhtx64lc[/MEDIA]This is what you are looking for in a rod blank but it can also tell you if that imx pro was built with the guides wrapped on the spine correctly. And it's even easier with a reel on because all you need to do is place the handle on the floor with the reel on and with your pointer finger bend the rod tip down and it will spin to the direction of the spine, which will show you if the guides were placed exactly on the spine of the rod. This should be something everyone who is buying a new rod should do is look to make sure the guides are placed exactly on the spine of a rod blank, this effects the sensitivity and put unwanted stress on the blank that over time could cause it to break especially the tip. If you don't believe me do your own research don't just pick the first rod on the rack check to make sure that the guides are built by a builder who took the time to properly build that rod you are going to spend money on. JMTCCongratulations juanr</blockquote>

[QUOTE="lunkerslayer, post: 388206, member: 217"] [MEDIA=youtube]CfCqhtx64lc[/MEDIA] This is what you are looking for in a rod blank but it can also tell you if that imx pro was built with the guides wrapped on the spine correctly. And it's even easier with a reel on because all you need to do is place the handle on the floor with the reel on and with your pointer finger bend the rod tip down and it will spin to the direction of the spine, which will show you if the guides were placed exactly on the spine of the rod. This should be something everyone who is buying a new rod should do is look to make sure the guides are placed exactly on the spine of a rod blank, this effects the sensitivity and put unwanted stress on the blank that over time could cause it to break especially the tip. If you don't believe me do your own research don't just pick the first rod on the rack check to make sure that the guides are built by a builder who took the time to properly build that rod you are going to spend money on. JMTC Congratulations juanr [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA