Reply to thread

Message

<blockquote data-quote="shorthairsrus" data-source="post: 181800" data-attributes="member: 219">1. the lights are led -- lights work - i tested them2. the plug at the y of the trailer - tested has power3. running lights work4. right break/signal is the culprit -- per my research the wires rub against the trailer and wear through.&nbsp; 5. The green wire has done that -- where is the question and how to pull the wires though -- do i tie one at the y and pull out through the back.&nbsp;&nbsp; 6. cyclops is the light in the middle of the trailer at the back it is rigged to the right side, same with the light at the wheel well and i have one more.&nbsp;&nbsp; those running lights appear to have quite a bit of wire on them.&nbsp;&nbsp; Can i pull everything back to a point and see if i can see the damage.&nbsp;&nbsp; Or do i unhook those and tie a wire to those too.&nbsp; 7. Ground -- shorelander has a seperate white ground running on each light -the ground isnt the problem.&nbsp;&nbsp; MY q is where to pull the wire out -- i know of a connector at the light and at the Y what other connectors does it have?&nbsp;&nbsp; The trailer is a single ax -- its a 2011 (this shouldnt be happening) and holds about 3100lbs.</blockquote>

[QUOTE="shorthairsrus, post: 181800, member: 219"] 1. the lights are led -- lights work - i tested them 2. the plug at the y of the trailer - tested has power 3. running lights work 4. right break/signal is the culprit -- per my research the wires rub against the trailer and wear through. 5. The green wire has done that -- where is the question and how to pull the wires though -- do i tie one at the y and pull out through the back. 6. cyclops is the light in the middle of the trailer at the back it is rigged to the right side, same with the light at the wheel well and i have one more. those running lights appear to have quite a bit of wire on them. Can i pull everything back to a point and see if i can see the damage. Or do i unhook those and tie a wire to those too. 7. Ground -- shorelander has a seperate white ground running on each light -the ground isnt the problem. MY q is where to pull the wire out -- i know of a connector at the light and at the Y what other connectors does it have? The trailer is a single ax -- its a 2011 (this shouldnt be happening) and holds about 3100lbs. [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA