Reply to thread

Message

<blockquote data-quote="PrairieGhost" data-source="post: 160631" data-attributes="member: 704">None of the powder measures work well with long grain powder.&nbsp; I always throw .2 grains light and trickle charge to the desired weight.&nbsp; With cartridges that I shoot a lot I use ball powders when possible.&nbsp; I have found that the best you can hope for is within .2 grains and it works best to move the handle quickly and cut of the powder kernels.&nbsp; If you go slow it will stop you, and if you stop it will cause the powder to settle and always give you a heavy throw.&nbsp; Some of the short kernel and super short kernel throw ok, but not like a ball powder. My new barrel 308 doesn't like Bighorn TAC, but it was perfect in my old barrel and used in some of the factory match ammo.223 up to 60 gr bullets I found H335 to work well.&nbsp; It was developed by Israel to use in the&nbsp; M16.22-250 I use Winchester 760270 Winchester, I like H4831 Short Kernel, but H414 or W760 work well alsoI have never had the best performance with ball powders in the larger cartridges like the 300 Win mag.&nbsp; Most of the pistol powders do well in the RCBS Uniflow.Edit:&nbsp; Do yourself a favor and order the micrometer for the Uniflow so you don't drive yourself nuts trying to set it.</blockquote>

[QUOTE="PrairieGhost, post: 160631, member: 704"] None of the powder measures work well with long grain powder. I always throw .2 grains light and trickle charge to the desired weight. With cartridges that I shoot a lot I use ball powders when possible. I have found that the best you can hope for is within .2 grains and it works best to move the handle quickly and cut of the powder kernels. If you go slow it will stop you, and if you stop it will cause the powder to settle and always give you a heavy throw. Some of the short kernel and super short kernel throw ok, but not like a ball powder. My new barrel 308 doesn't like Bighorn TAC, but it was perfect in my old barrel and used in some of the factory match ammo. 223 up to 60 gr bullets I found H335 to work well. It was developed by Israel to use in the M16. 22-250 I use Winchester 760 270 Winchester, I like H4831 Short Kernel, but H414 or W760 work well also I have never had the best performance with ball powders in the larger cartridges like the 300 Win mag. Most of the pistol powders do well in the RCBS Uniflow. Edit: Do yourself a favor and order the micrometer for the Uniflow so you don't drive yourself nuts trying to set it. [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA