Reply to thread

Message

<blockquote data-quote="PrairieGhost" data-source="post: 228471" data-attributes="member: 704">SuppressYourself you caused me a lot of work yesterday. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" />&nbsp; I used a magnet to check all 400 of my reloads.Every year you learn something different.&nbsp; I anneal my brass because I work the neck a lot.&nbsp; They say you have to have Berger VLD's close, touching, or jammed into the rifling to get accuracy.&nbsp; Now I am back .025 and shooting under .20 inch.&nbsp; I found that after sizing with a .286 bushing in a RCBS Gold Metal Match die I was still getting .002 to .007 run out.&nbsp; So now I size with my standard die, polish, expand and neck turn, resize again to center neck, expand, and resize with the .286 bushing die.&nbsp; Bushings are supposed to be set to move slightly in the case.&nbsp; They will not center the neck with the bore.&nbsp; Sooooo to get .000 to .001 run out I have to go through a lot of work, but when your done once you don't need to do it again.&nbsp; Now it's simply neck size with the bushing die.&nbsp; I'll try to throw in a pic of a group from my phone in a moment. It's of three different bullets with two different powders and still a very good group.[ATTACH]27205[/ATTACH]</blockquote>

[QUOTE="PrairieGhost, post: 228471, member: 704"] SuppressYourself you caused me a lot of work yesterday. :) I used a magnet to check all 400 of my reloads. Every year you learn something different. I anneal my brass because I work the neck a lot. They say you have to have Berger VLD's close, touching, or jammed into the rifling to get accuracy. Now I am back .025 and shooting under .20 inch. I found that after sizing with a .286 bushing in a RCBS Gold Metal Match die I was still getting .002 to .007 run out. So now I size with my standard die, polish, expand and neck turn, resize again to center neck, expand, and resize with the .286 bushing die. Bushings are supposed to be set to move slightly in the case. They will not center the neck with the bore. Sooooo to get .000 to .001 run out I have to go through a lot of work, but when your done once you don't need to do it again. Now it's simply neck size with the bushing die. I'll try to throw in a pic of a group from my phone in a moment. It's of three different bullets with two different powders and still a very good group.[ATTACH=CONFIG]27205._xfImport[/ATTACH] [/QUOTE]

Verification

What is the most common fish caught on this site?

Reply to thread

Recent Posts

Friends of NDA