I checked all the cylinders for compression -- 220 PSI which is a very good sign. Cleaned up the motor real good and come to find out that the rubber plug sealing the dipstick is allowing a very small amount of oil out. Other than that I guess I will ust ho for the best this weekend while...
I have a 2011 Mercury 115 4 stroke that is leaking oil out of the air filter its coming from a breather hose off the motor. Also there is a port below the discharge of the cooling water that's leaking small amounts of oil. Oil level is perfect on the dipstick, engine runs great with no loss of...
The pump that was installed by Backman Drilling was a Goulds 18GS10422C 2 Wire 1 HP 230V 4" Submersible Water Well Pump with Motor. Well depth was at 70 ft.
- - - Updated - - -
The wire that was used for the pump was a 10-2 flat with ground.
I want to wire a 220 volt submersible pump to a temp power set up from a transformer. I need to bury 300 ft. of wire so I can get my well running. I was wondering if I could use 3-10 AWG TYPE MTW GR1 600 VOLT UL WIRE? They are single strand wires and are not connected. The wire coming out of...
The males will smell her from blocks away. Like everyone else said don't take your eyes off of her. Make sure everyone else in the household knows what's going on too or they could just let her run outside and she could be gone in a flash on a booty call!:;:muahaha
STAY AWAY FROM VECTOR! They are garbage, we have had all of our windows fixed 5 times within the past 6 years. After dealing with that problem through front street millwork they are A$$ Holes to deal with. We built in copper ridge with Chad Wachter and Jaime Schmidt. Those two should never...