Search results

  1. SDMF

    Model 70 Help

    You could start a survey and see if everyone would agree to brrl, or brl, then we could all vote on the results and ridicule anyone who didn't conform to whatever new abbreviation we come up with.
  2. SDMF

    Model 70 Help

    1. Assuming that the rifle has 3 screws for the bottom metal, the front and rear screws should be tight, ~50 in/# or so in a wood stock. That middle screw needs to be just finger tight enough to not back out. If you make that screw too tight, you'll flex the action, accuracy and feed/function...
  3. SDMF

    Model 70 Help

    Winchester M70 barrels are not "fused" or crush-fit to the action. Winchester M70 barrels are threaded just like almost everyone else. That said, no, you probably can't just put one on by yourself unless you buy the go/no-go gauges, a bbl vice, and learn how to use them so your rifle...
  4. SDMF

    Custom rifle builder?

    I’d have a hard time not just buying a Kimber Mt Ascent in 280AI. if you’re dead-set on the PRC, perhaps source a Kimber WSM and re-barrel. id not spend the extra for a carbon-wrapped bbl and a new stick when Lilja and a few others will duplicate lightweight factory contours.
  5. SDMF

    Custom rifle builder?

    What is your build plan?
  6. SDMF

    Nitro zv20

    Shorthairs, running from Hennegar to Pelican sans the need for a rain-suit OR Ibuprofen is justification enough.
  7. SDMF

    Knives for Deer Processing

    this one: https://www.amazon.com/dp/B004JJV66U/?tag=nodakangler10-20
  8. SDMF

    Knives for Deer Processing

    You need to get them on a steel or set of ceramic sticks ASAP or you really will have to SHARPEN them rather than just touch them up.
  9. SDMF

    Knives for Deer Processing

    They do work. I prefer more curve, especially for removing facia as the cuts are "longer" requiring fewer "insertions". I feel like the curve in the blade also gives me more control as to where along the knife the actual cutting is taking place. I find a straight blade is more difficult to...
  10. SDMF

    Knives for Deer Processing

    Victorinox 6" flexible curved blade: https://www.amazon.com/dp/B0000CF94L/?tag=nodakangler10-20 That and a steel nearby will get you a long way. Just about anything will work to break-down a critter into quarters. I like some curve, some flex, and fairly thin to remove facia/silver-skin and...
  11. SDMF

    Typhoon Defense F12 Shotgun

    I gave up 8# shotguns when I swapped from a Rem 1100 to. Beretta 303.........
  12. SDMF

    anybody bird hunting

    I saw one flock of huns on Friday eve, about 10, some of them were barely bigger than a dove. A friend and I got 3 sharps each on Sat, 2 each on Sunday (should have each had 3). The only huns I saw once season had actually opened were out on the road about 6:30 last night between a posted corn...
  13. SDMF

    Typhoon Defense F12 Shotgun

    I looked at their website and apparently they developed their tiger to have zero creep. I wonder what their trigger is like, and who proof-reads their stuff before putting it onto their website?
  14. SDMF

    Boat fails/shit happens 2020

    Check the trim switch in the bow. Mine was corroded something awful and would do the same thing. Replaced the switch, cleaned up the connections and the problem hasn't returned.
  15. SDMF

    Baiting Ban

    No Shit as in "It really really works"? Or No Shit as in "Don't shit @ the scrape site"?
  16. SDMF

    Minnesota Bear

    That's a BRUTE of a bear, congratulations to her! What do you use the rendered bear fat for?
  17. SDMF

    Sharp-tails/ MT

    Perfect!! Now I know where to drop them off next Sunday.
  18. SDMF

    Pointing Labs

    Had a lab growing up that would "sight-point", in that when he was pointing and his tail stopped, he was looking @ the bird. It wasn't the low-head, leg-up traditional "point". His head was about as high as he could get it, nose down, ears perked up, almost in a "dominating/domineering" pose...
  19. SDMF

    Pointing Labs

    Small Munsterlander
  20. SDMF

    Land for Youngsters to Hunt

    You must have a very fast tractor that only drives to the East if you're able to shorten days to only 10hrs.
View older results

Recent Posts

Friends of NDA

Top Bottom