Smitty Sled

CatDaddy

Founding Member
Founding Member
Joined
May 16, 2015
Posts
3,984
Likes
2,172
Points
698
Location
Casselton
I do a fair amount of walk-out ice fishing trips and now that we have snow my gear is hard to pull in the Otter sled. Amongst a few other mods, I'm contemplating something a smitty sled similar to the video. Ability to breakdown would be preferred I would think....

Anyone else run one? Other non-motorized ideas to make my 100 pounds-in-a-tub easier to pull?

https://www.youtube.com/watch?v=ARUH_VBW_k0

Or maybe something like this...he uses coffee table hinges.

https://www.youtube.com/watch?v=Q7kvajOfH6g
 
Last edited:


Auggie

Founding Member
Founding Member
Joined
Apr 13, 2015
Posts
2,599
Likes
987
Points
423
Location
Dickinson, ND
PXL_20201227_231621976.jpg
I made this smitty sled with remnant 2x4 and 6x2's with maybe $5 of nuts and bolts. It pulls apart and 4 inch bolts stick out of the bottom of the 2x4's. I drilled holes in the top of the 2x6's. The 2x4's just drop into place in the aformentioned holes and are held by gravity/friction. Each of the legs are painted a different color and matches the appropriate 2x4 end. I found the skis in the farm in a shed last fall.
 

CatDaddy

Founding Member
Founding Member
Thread starter
Joined
May 16, 2015
Posts
3,984
Likes
2,172
Points
698
Location
Casselton
Auggie - does it make as much of a difference as I think it will with regards to drag?
 

Rowdie

Founding Member
Founding Member
Joined
Apr 15, 2015
Posts
12,560
Likes
5,677
Points
938
I'm done dragging shit, if I can't use 4 wheeler, or have some young bucks helping me, I don't go.
 


Davey Crockett

Founding Member
Founding Member
Joined
Apr 22, 2015
Posts
14,274
Likes
1,727
Points
638
Location
Boondocks
It depends on how you fish but the very first one I ever made is my favorite. It's the smallest but the bonus is that it's the lightest and can haul it even in the backseat of a small car. Hard to explain but basically a flat floor with side walls that folds in middle so Its a sled to skid the gear out then set it up on end with wings for a wind block. It does everything that I was looking for in a walking sled. I 'll try to get some pics loaded. Made my skis out of some menards flooring.
 

Rowdie

Founding Member
Founding Member
Joined
Apr 15, 2015
Posts
12,560
Likes
5,677
Points
938
I'd kill for a 14 year old boy and you have one more to help.
Make em play football and wrestle and pulling a sled will be easy for them.
 

Auggie

Founding Member
Founding Member
Joined
Apr 13, 2015
Posts
2,599
Likes
987
Points
423
Location
Dickinson, ND
Auggie - does it make as much of a difference as I think it will with regards to drag?

Pulling with the smitty makes a world of difference as there's much less friction. I haven't pulled it through the snow yet. I've only been going a few hundred yards at a time with it on ice and gravel and it pulls much nicer. I ordered a hub and will pair the smitty with a jet sled. I can get everything in the mini-van so I won't have to switch car seats all the time.
 
Last edited:

mikef

★★★★ Legendary Member
Joined
Feb 24, 2018
Posts
461
Likes
65
Points
155
Location
bismarck
I was thinking of buying the factory skis for a clam sled. Does anyone have experience with these? Thx
 

Auggie

Founding Member
Founding Member
Joined
Apr 13, 2015
Posts
2,599
Likes
987
Points
423
Location
Dickinson, ND
I was thinking of buying the factory skis for a clam sled. Does anyone have experience with these? Thx

The hyfax strips you bolt to the fish trap help some with pulling straight, but the strips are more so to protect the sled and do not reduce pulling stress.
 


mikef

★★★★ Legendary Member
Joined
Feb 24, 2018
Posts
461
Likes
65
Points
155
Location
bismarck
The hyfax strips you bolt to the fish trap help some with pulling straight, but the strips are more so to protect the sled and do not reduce pulling stress.

Ok. Thankyou. I might as well drag the snowmobile along then
 

shorthairsrus

Founding Member
Founding Member
Joined
Apr 13, 2015
Posts
8,589
Likes
594
Points
443
Two feet of snow and a heavy load = shitty smitty. We use to drink those in da 80s
 

Auggie

Founding Member
Founding Member
Joined
Apr 13, 2015
Posts
2,599
Likes
987
Points
423
Location
Dickinson, ND
Ok. Thankyou. I might as well drag the snowmobile along then

I would still put the strips on the sled. It increases the life of the fish trap sled, especially if you end up parking a bit from the ice and have to drag the sled on a gravel road. It even makes a difference in the otter sleds.
 

Auggie

Founding Member
Founding Member
Joined
Apr 13, 2015
Posts
2,599
Likes
987
Points
423
Location
Dickinson, ND
Here are some better pics of the smitty with my hub house. I bought each son a small bucket for their rods and stuff and make them carry it to and from. Then they sit on the buckets. This is no where near as mobile as the voyager fish trap, but this fits in the van, easily loads/unloads, and pulls easy.
PXL_20210109_170225291.jpg
PXL_20210109_170219107.jpg
PXL_20210109_170150322.jpg
 

CatDaddy

Founding Member
Founding Member
Thread starter
Joined
May 16, 2015
Posts
3,984
Likes
2,172
Points
698
Location
Casselton
Thanks Auggie! I decided to go with the coffee table hinge idea - just got them in the mail and found some downhill skis at the thrift store for $4. Gonna get going on it today!
 


Recent Posts

Friends of NDA

Top Posters of the Month

  • This month: 311
  • This month: 311
  • This month: 91
  • This month: 86
  • This month: 71
  • This month: 57
  • This month: 52
  • This month: 49
  • This month: 48
  • This month: 43
Top Bottom