Search results

  1. SDMF

    NDA Ammo and Reloading Component TRADE thread

    Midway has 130 and 165 TTSX available. I know it's not what you requested but either would make a tremendous elk projectile, and are available.
  2. SDMF

    big 3 drawing

    I suspect it'll be a total non-issue unless she gets put on complete bedrest. Do some scouting ahead of time and she probably won't have a very long stalk.
    • SDMF
    • Post #199
    • Forum: Elk
  3. SDMF

    big 3 drawing

    I shot a moose in early Sept in Alberta. It got into the 70's that day. We were able to use an ATV to recover him whole. It took 90-120Min from death until we got him back to camp and had the hide off. Then we broke him down into quarters/straps. I didn't take any ribs and very little neck...
    • SDMF
    • Post #195
    • Forum: Elk
  4. SDMF

    What are these?

    Throw or quarter or dime in and re-take the 1st pic to give some size reference.
  5. SDMF

    Medora fire

    I wouldn't have thought of the O2 starvation though it makes a lot of sense, good tip! Without some rain and greening up, I don't see myself off of pavement/gravel anytime soon. I don't do much "off-roading" anyway and certainly don't have anything important enough going on to risk being...
  6. SDMF

    New Rapala R12 Fillet Knife

    #Chainsaworfilletknifealllooksthesame. I much prefer an electric to a standard blade, though not for lack of significant $$ dumped into finding a standard blade I like. I prefer the corded HD Rapala power-head with thin blades that have some flex and little to no curve. I have the original...
  7. SDMF

    Vaporizing Things at Close Range

    Maybe sand-cast them in Bronze?
  8. SDMF

    Vaporizing Things at Close Range

    Jack Daniels and a Dremel oughta do it.
  9. SDMF

    Roll Your Own .44

    http://bulletin.accurateshooter.com/2021/03/sunday-gunday-300-wsm-pending-1k-world-record-heavy-gun/?fbclid=IwAR1Suwe1aLCy2K0CBjLLKNX5zMeU7Ek6gN4ZUYvSKXi9GN406AGf03lG6YY it’s not even close to the highest BC .308 available. Nothing fancy regarding twist either 1:10”. Good balance of velocity...
  10. SDMF

    NDA Ammo and Reloading Component TRADE thread

    You'd stroke out knowing how many rounds I run between checking charge weights on a Dillon. ;:;rofl
  11. SDMF

    Old .22 rifles

    Yes. Same as the 61, the later versions have a grooved receiver for scope mounting and all things being equal are more desirable/expensive.
  12. SDMF

    NDA Ammo and Reloading Component TRADE thread

    Curious to hear your thoughts on the Auto-Trickler once you've wrung it out a bit. I've thought it looked a bit "Rube Goldberg-ish" with the looped/twisted drive belts and such. That said, I've never seen one in the flesh or in action.
  13. SDMF

    Explain "blowing the bait fish"

    You can have the "Windblown Shoreline" this time of year. I'll take the lee-side with the clearer water allowing the sun access to the dark bottom, warming the water.
  14. SDMF

    Frozen Four '2021

    If that happens can they hug after the game or do they have to remain socially distant? Not a slight on either team but the NCAA: Crying doggone shame that after almost 8 periods of hockey in 1 game, the teams can't line up and shake hands. ~150min on the ice beating on each-other, like...
  15. SDMF

    Vaporizing Things at Close Range

    6MM 105 'Max @ 3200 is a 'flinger as well.
  16. SDMF

    Roll Your Own .44

    Molten lead gonna melt that anyway. Unless he's swadeging slugs into the .40 Brass?
  17. SDMF

    Roll Your Own .44

    https://www.brownells.com/reloading/measuring-tools/concentricity-gauges/index.htm No need to fill the primer pocket, according to the video the dude left the spent primer in place.
  18. SDMF

    Frozen Four '2021

    Regarding the woman doing the play-by-play, Someone oughta secure her to a guillotine and give Doc Emerick the rope. #NAILSONACHALKBOARD.
  19. SDMF

    Roll Your Own .44

    It's just mechanics and vocabulary with some experience sprinkled in. Hornady used to include a ~15min DVD with their loading manual. IT looked to have been actually made in the late 60's or very early 70's. In that DVD old-man Hornady talked about their processes and how keeping the COG in...
  20. SDMF

    Roll Your Own .44

    BR shooters take the high spots off of case necks just to even out neck-tension and they don’t even spin. A case that’s been loaded, shot (expanded and sprung back), then hits the ground post-ejection CAN’T be “round” enough to reliably stabilize. IMO the Bullets that did stabilize were luck...

Recent Posts

Friends of NDA

Top Bottom