I am looking for some real world experience,using H380 in an LR308.I have 2# of H380 sitting on the shelf,previously loaded 22-250 with it and now use varget.
I finished a dpms project,308 20" 1/10 twist,and thought I would save a few bucks and give it a try.Looking at loading 168 tsx or vld,thinking mid 40's for grns.I used the superlative arms bleed off gas block,but h380 is fairly clean burning anyway,but have read it might be a little slow for cycling some auto loaders.Eventually will probably end up using Varget,but thought this would make good use of powder I haven't been using.I do load Varget in my bolt 308 with very good results.
Any thoughts or suggestions,this rifle will be filling my rifle tag this year,hence the bullet choices.
I finished a dpms project,308 20" 1/10 twist,and thought I would save a few bucks and give it a try.Looking at loading 168 tsx or vld,thinking mid 40's for grns.I used the superlative arms bleed off gas block,but h380 is fairly clean burning anyway,but have read it might be a little slow for cycling some auto loaders.Eventually will probably end up using Varget,but thought this would make good use of powder I haven't been using.I do load Varget in my bolt 308 with very good results.
Any thoughts or suggestions,this rifle will be filling my rifle tag this year,hence the bullet choices.