Taking out a tree

Mr. Pike

Established Member
Joined
Apr 17, 2022
Posts
157
Likes
57
Points
85
My dad has a tree he wants me to cut down in his back yard. I read recently in the Bismarck Tribune, that you have to be a licensed arborist to do this. It's not that big of a tree, so I don't think it would be that hard to take down. Also, I noticed there's a nest in the tree with two baby birds in it. I think its those collared doves that you see around town everywhere. Nuisance species.
 


Obi-Wan

Founding Member
Founding Member
Joined
May 15, 2015
Posts
10,078
Likes
7,724
Points
1,008
Location
Bismarck
My dad has a tree he wants me to cut down in his back yard. I read recently in the Bismarck Tribune, that you have to be a licensed arborist to do this. It's not that big of a tree, so I don't think it would be that hard to take down. Also, I noticed there's a nest in the tree with two baby birds in it. I think its those collared doves that you see around town everywhere. Nuisance species.
The ordinance / license is for those who remove trees for hire
 

Fester

★★★★★ Legendary Member
Joined
Sep 15, 2018
Posts
2,843
Likes
2,475
Points
628
Location
Space
My dad has a tree he wants me to cut down in his back yard. I read recently in the Bismarck Tribune, that you have to be a licensed arborist to do this. It's not that big of a tree, so I don't think it would be that hard to take down. Also, I noticed there's a nest in the tree with two baby birds in it. I think its those collared doves that you see around town everywhere. Nuisance species.
Dont get paid for it....dont post a video to you tube to make money...
 


luvcatchingbass

Founding Member
Founding Member
Joined
Dec 1, 2015
Posts
4,258
Likes
1,158
Points
523
Location
SE ND.
I've become well versed in tree cutting the last couple years. Not bragging because it has been out of necessity, every time I say that I'm not going to be doing much tree cutting for a while a storm hits.
 

Rut2much

Founding Member
Founding Member
Joined
Apr 24, 2015
Posts
2,920
Likes
807
Points
438
Location
Devils lake
Start from the top, work your way down. Use rope to direct the cut pieces to fall the direction you want. Stay away from power lines. Know when you are out of your league.
Bingo, cherry picker/boom lift = novice tree cutter's best friend albeit it's only one tree. Better safe than sorry..(Some doozy mishap videos of houses being demolished on the tube.
 

guywhofishes

Founding Member
Founding Member
Joined
Apr 21, 2015
Posts
30,188
Likes
8,815
Points
1,133
Location
Faaargo, ND
I’ve become fairly adept at felling trees - it’s pretty interesting how one needs to approach it safely. I take forever compared to pros on youtube (measure / mark / think / do it again). Hitting your target landing zone is rewarding.

That said, I’d never risk the main house. I risked the garage a couple months back. The risk sorta gets in your blood. 😆
 


guywhofishes

Founding Member
Founding Member
Joined
Apr 21, 2015
Posts
30,188
Likes
8,815
Points
1,133
Location
Faaargo, ND
IMG_1877.jpeg

IMG_1874.jpeg

IMG_1884.jpeg

This twin elm from hell had half of itself leaning in the wrong direction. I’ve cut enough trees to know there is no true bond between the two - so I McGyvered it heavily to get it to fall in a safe zone - guided by its twin’s weight and some synthetic winch rope.
 

luvcatchingbass

Founding Member
Founding Member
Joined
Dec 1, 2015
Posts
4,258
Likes
1,158
Points
523
Location
SE ND.
Start from the top, work your way down. Use rope to direct the cut pieces to fall the direction you want. Stay away from power lines. Know when you are out of your league.
Bingo, cherry picker/boom lift = novice tree cutter's best friend albeit it's only one tree. Better safe than sorry..(Some doozy mishap videos of houses being demolished on the tube.
These right here. I have rented a towable boom lift a couple times between my stuff and buddies stuff. If you are interested in getting something shoot me a PM and I can point you to a normally good place in Bismarck or Fargo.
I’ve become fairly adept at felling trees - it’s pretty interesting how one needs to approach it safely. I take forever compared to pros on youtube (measure / mark / think / do it again). Hitting your target landing zone is rewarding.

That said, I’d never risk the main house. I risked the garage a couple months back. The risk sorta gets in your blood. 😆
It is satisfying when a plan goes right. I have had a couple that turned into rodeo's which caused a little extra stress, let's you know your alive I guess.
 

guywhofishes

Founding Member
Founding Member
Joined
Apr 21, 2015
Posts
30,188
Likes
8,815
Points
1,133
Location
Faaargo, ND
PM me a good boom rental contact in FM plz. I have a couple monster boxelders between two fences. Ick.
 


Zogman

Founding Member
Founding Member
Joined
Apr 20, 2015
Posts
5,408
Likes
2,833
Points
733
Location
NW Angle, MN and Grand Forks, ND
IMG_1877.jpeg

IMG_1874.jpeg

IMG_1884.jpeg

This twin elm from hell had half of itself leaning in the wrong direction. I’ve cut enough trees to know there is no true bond between the two - so I McGyvered it heavily to get it to fall in a safe zone - guided by its twin’s weight and some synthetic winch rope.
Holy Moly. You da MAN!
 

Allen

Founding Member
Founding Member
Joined
Apr 24, 2015
Posts
11,568
Likes
2,978
Points
783
Location
Lincoln, kinda...
I have a few 50-70 ft tall Aus-trees (Australian cottonwoods) and Willow (Laurel and Golden?) that need to be tipped over. I've been plannin how to do it for over a year now. At least one or two would already be gone if I wasn't spending all my chainsaw time still cleaning up after the storms from a couple weeks ago.

I have cut down a fair number of trees over the years, but this will be upping the ante quite a bit. So, yeah...I've been watching a lot of youtube videos on how to fell large trees. I had to take down a 50 ft tree the other day after it was damaged, and it was kind of a hairy experience.
 

guywhofishes

Founding Member
Founding Member
Joined
Apr 21, 2015
Posts
30,188
Likes
8,815
Points
1,133
Location
Faaargo, ND
I have a few 50-70 ft tall Aus-trees (Australian cottonwoods) and Willow (Laurel and Golden?) that need to be tipped over. I've been plannin how to do it for over a year now. At least one or two would already be gone if I wasn't spending all my chainsaw time still cleaning up after the storms from a couple weeks ago.

I have cut down a fair number of trees over the years, but this will be upping the ante quite a bit. So, yeah...I've been watching a lot of youtube videos on how to fell large trees. I had to take down a 50 ft tree the other day after it was damaged, and it was kind of a hairy experience.
Yes - it's all about respect for the unforeseen physics and head on a swivel type attitude. Getting older teaches you that ignoring that crap costs $$/health.

My wife has videoed some BIG tree fellings (green ash) and I'm always embarrassed how fast I GTFO of Dodge when the sound let's me know it's time. (aka run like a scared little girl)

My biggest worry is widow-makers falling on my head - lots of dead branches in those old trees.

I drive around town/country and shake my head at all the monstrous poplar/cottonwood hybrids (those tall softball field trees - are those the Aus-trees?) that are dead/dying after reaching incredible heights. Big $$ to remove.

Meanwhile the next door neighbor to them just planted a bunch. Ba ha ha. WHY???
 


Recent Posts

Friends of NDA

Top Posters of the Month

  • This month: 311
  • This month: 107
  • This month: 78
  • This month: 65
  • This month: 58
  • This month: 56
  • This month: 54
  • This month: 45
  • This month: 36
  • This month: 34
Top Bottom