Hungarians

Tinesdown

Established Member
Joined
Apr 18, 2016
Posts
178
Likes
31
Points
123
I got a couple huns on opening weekend that were just barely dry from having hatched. But, a buddy flushed the flock and those were the only 2 that flew close enough.

Prior to pheasant season, my shotguns have Cyl chokes and I shoot 20Ga AA/Fiocchi target loads in 8's or occasionally 7.5's.

When pheasant season opens, it's still a 20ga, but, I swap over to 1oz #5's and IC chokes. It's fairly rare that I move to a 12Ga before Thanksgiving. Once I do move to a 12 it's still an IC choke but 1 3/8Oz of 4's or 5's.
Yeah huns are a bird that u never seem to have the right load in have killed em with trap shells but prolly was lucky your better off using at the very least 6 ,5 with 1/4 ounce loads. Suckers are very fast an always kick in a spread out flock imo.
 


Jiffy

★★★★★ Legendary Member
Joined
Oct 19, 2018
Posts
2,024
Likes
1,467
Points
448
Location
West Fargo
The trick with Huns is to pick one out of the covey.

I never do, I ALWAYS flock shoot at least the first shot! lol
 

SDMF

Founding Member
Founding Member
Joined
Apr 24, 2015
Posts
11,061
Likes
807
Points
498
Yeah huns are a bird that u never seem to have the right load in have killed em with trap shells but prolly was lucky your better off using at the very least 6 ,5 with 1/4 ounce loads. Suckers are very fast an always kick in a spread out flock imo.
Mid-80’s there were Huns all over. Dad would drive me around, flush the birds off the road, then turn the dog loose on them whenever they landed. In short I got tons of practice and finally learned to pick out a bird. I wasted a LOT of shells “flock shooting”.

Early season both grouse and partridge shooting seems to be fairly short range for me. Grouse in particular also aren’t all that hard to get on the ground, that’s why I use target loads prior to pheasant opener.
 

grumster

★★★★★ Legendary Member
Joined
Dec 19, 2016
Posts
775
Likes
1,135
Points
383
Location
Bismarck
I shoot 2 3/4" 6's until late season then I go to 3" 5's all in a 20 gauge.
 


svnmag

Founding Member
Founding Member
Joined
Apr 20, 2015
Posts
18,294
Likes
3,336
Points
933
Location
Here
1727316883471.png


I prefer 7 1/2.

IMHO: These are good "do it all" shells with hard shot. A "nickel steel" M12/FC will down a pheasant @40+: I said "down" not "kill".

As SD; around Thanksgiving I'm stoked with Federal "baby magnum" 1 3/8 #4's @1400fps: What I like about this setup; when a bird flushes you have time to adjust your footing and ensure proper gun mount/cheek weld before slapping the trigger.

I like this technique as I have pronounced cross dominance and it allows for a quick mental checklist: Not "proper" shotgunning and definitely not for snap shooting: I like the "large" shot for energy retention. I believe these loads would destroy any bird within 25yds with a "pre-shotcup" FC.

And they kick like hell.

1727317297580.png


1727320222766.png


That is all.
 
Last edited:

Recent Posts

Friends of NDA

Top Posters of the Month

  • This month: 251
  • This month: 134
  • This month: 99
  • This month: 89
  • This month: 85
  • This month: 54
  • This month: 48
  • This month: 48
  • This month: 47
  • This month: 43
Top Bottom