24 volt Strikemaster power hea

[Ss34ever]

Will a k-drill bolt to a 24 volt strikemaster power head? I'm thinking about using a power head instead of a drill for thicker ice. Any suggestions or input appreciated.

 

[Weekender]

The K-Drill and StrikeMaster Lite-Flite both connect to the powerhead the same way. Should hook right up.

 

[Freedom]

Will a k-drill bolt to a 24 volt strikemaster power head? I'm thinking about using a power head instead of a drill for thicker ice. Any suggestions or input appreciated.

You might be better off buying larger drill batteries. I like my 24v but late ice I almost always need two batteries. Add in the extra power needed to cut holes with the k drill it seems like a bad combo imo

 

[Tikka280ai]

You might be better off buying larger drill batteries. I like my 24v but late ice I almost always need two batteries. Add in the extra power needed to cut holes with the k drill it seems like a bad combo imo

I put my 8.5 kdrill on a 40volt strikemaster auger and it seems to kick out from overload on occasion. Depending on what size kdrill you run I'd most likely be a bit disappointed in the 24 volt version

 

[cooter00]

Ived had good luck with the bigger Milwaukee batteries late ice the 6 hr ones

 

[Traxion]

I agree the K Drill bites harder than the lite flite from what I’ve seen. That could cause issues as it isn’t hard to overload the 24v and kick it off.