Tractors

[Tymurrey]

I have and the key is making sure the trees aren't too big for the spade. Honestly, a typical skid steer spade is only going to be 4' diameter at max which is going to limit you to a max of maybe a 5' tree depending on species. The machines will pick bigger trees but you don't get enough rootball for a good survival rate. If you want bigger trees and instant habitat, you really need to go truck mounted 90" or 100" which will be on a semi chassis. I've used skid steer spades, tow behind spades, and hired large truck mounted spades to move trees. At the end of the day, with the investment of time and money you make in the trees and moving them, a little TLC watering and fertilizing them is pretty easy to justify.

Thanks for the reply. I just hate seeing areas being broken up for farming and trees getting pushed over and piled up when i could possibly "repurpose" them. I guess i wouldn't be out much but time and some cost. They would be going in a pasture with no good way of watering them besides hauling water with nowhere close that would be good to pump out of.

 

[Lycanthrope]

I have and the key is making sure the trees aren't too big for the spade. Honestly, a typical skid steer spade is only going to be 4' diameter at max which is going to limit you to a max of maybe a 5' tree depending on species. The machines will pick bigger trees but you don't get enough rootball for a good survival rate. If you want bigger trees and instant habitat, you really need to go truck mounted 90" or 100" which will be on a semi chassis. I've used skid steer spades, tow behind spades, and hired large truck mounted spades to move trees. At the end of the day, with the investment of time and money you make in the trees and moving them, a little TLC watering and fertilizing them is pretty easy to justify.

Ill be using a skid mounted mover, most of my trees arent too big yet. Id guess its also good to move them when dormant if possible. Also taking a hose and some loose dirt and washing the dirt down where there are gaps left around the hole couldnt hurt. I was thinking if you are really ambitious you could use a cement mixer and dump some mud in the bottom of the hole so you know at least part of the plug you stick in there is going to have good contact with the surrounding dirt when the tree is put in there. When you move your trees is a great time to do some aggressive pruning. The less leaves and top growth the tree has left, the less water its going to require, which will give the roots some time to start growing before it dries out too much.

 

[Tymurrey]

I think where a tree spade would be beneficial too is when i have leftover trees from spring planting and replacements i could plant them in an area until i am ready for them. I've tried it before and after a couple years digging them up with a shovel and transplanting but i don't think i took enough of the root ball and they died or i did it to late in the spring.

in the pic you can see the food plots i have on the right side. the rainbow lines are all soil conservation planted trees and the 5 pink ones are planned continuations of the rows. I have hand planted a few thousand trees in the pasture but they are sure slow to take off without fabric and care. easy to see all the junipers and cedars when it's grazed down though.

 

[Tymurrey]

Did some ripping where i plan to plant trees next spring… So far i like this little 40hp tractor

have you found the ripping helps for the roots. I picked up one of the heavy duty subsoilers this spring and can rip 20+" down but never thought of doing that ahead of tree planting. I just spray roundup the width of the fabric and mow it if it's real heavy vegetation

 

[Lycanthrope]

I think where a tree spade would be beneficial too is when i have leftover trees from spring planting and replacements i could plant them in an area until i am ready for them. I've tried it before and after a couple years digging them up with a shovel and transplanting but i don't think i took enough of the root ball and they died or i did it to late in the spring.

in the pic you can see the food plots i have on the right side. the rainbow lines are all soil conservation planted trees and the 5 pink ones are planned continuations of the rows. I have hand planted a few thousand trees in the pasture but they are sure slow to take off without fabric and care. easy to see all the junipers and cedars when it's grazed down though.

Soil conservation, from my experience, plants trees about twice as dense as they should be ideally. I think they expect a fair amount will die from neglect or whatever. I like the look of a tree that has room to grow more than that of trees that end up growing into each other after 10 years or whatever. On my land, there is a clay layer thats down about 16 to 18 inches, pretty consistently throughout most of my property, the clay isnt thick, about 2 inches or so. Problem that happens often is that some trees roots hit this clay layer and then grow sideways because they arent able to penetrate. Some plant roots will penetrate clay, both others cant. Then, if you get a dry year, your trees will just die unexpectedly, because they cannot access the deep moisture thats needed in drought conditions. If you break that clay layer, trees that otherwise might not send deep roots, will be able to keep growing down and will have water available when they need it. This might not be important for everyone, it just kinda depends on your soil situation. Also, if you have a clay layer, it can cause water too pool in an area instead of draining away, which can kill trees as some trees cannot handle setting in water for a week or two. Breaking the soil does help with establishment and also makes planting a lot easier if you are doing it by hand. What I do typically is rip the soil, then harrow drag it and maybe till, depending what Im planting and how I want it to look when Im done. Tilling isnt as important, but if you want to incorporate some fertilizer into the soil, its not a bad last step. You could also put down some fertilizer before dragging it also if you dont have a tiller available. Just dont throw fertilizer on top of the soil and expect it to help your plants much, unless its going to rain for sure shortly after you put it down. Ripping also aerates the soil, more o2 = happier roots = faster growth.

 

[BrokenBackJack]

Ripping before planting really helps the roots to grow faster, as they aren't fighting to go through hard packed soil. Just make sure to really water them after planting.

 

[Tymurrey]

I would think ripping would help with closing back up after the tree planter machine goes through. I’ve noticed some die from not getting the void sealed around the roots. Might have to try ripping this year. I wonder if I can use some of the box blade rippers to build a 3 tine ripper. Built a hiller and a furrower last year.

 

[Lycanthrope]

I would think ripping would help with closing back up after the tree planter machine goes through. I’ve noticed some die from not getting the void sealed around the roots. Might have to try ripping this year. I wonder if I can use some of the box blade rippers to build a 3 tine ripper. Built a hiller and a furrower last year.

I know land pride sells one identical to mine that is 2 tines. mine has a shear pin that ive sheared several times when hitting big rocks, if you build something that doesnt, youd wanna take it nice and slow I think.

 

[Tymurrey]

Lycan,

Do you feel mowing between the rows makes a big difference. The rows in my pasture I don’t mow between because I never had the proper equipment but do now. The brush growing up between the rows has been fantastic hunting. I don’t know if the trees are slow because of the poorer soil or if it is from not mowing. The rows in the farm yard are doing great but I mowed them

 

[Tymurrey]

I know land pride sells one identical to mine that is 2 tines. mine has a shear pin that ive sheared several times when hitting big rocks, if you build something that doesnt, youd wanna take it nice and slow I think.

I don’t think the big king kutter one I have has a shear pin. I was wondering if I took some of the old chisel plow shanks and put knives instead of shovels on them if they would get deep enough. I had the big single shank subsoiler on my 4320 tractor and was ripping the hard pan in our field where water is pooling and getting alkaline now and caught a few rocks with it but I took it slow and the 3 point had enough play to slide around the ones I hit nothing was to solid luckily.

 

[Lycanthrope]

Lycan,

Do you feel mowing between the rows makes a big difference. The rows in my pasture I don’t mow between because I never had the proper equipment but do now. The brush growing up between the rows has been fantastic hunting. I don’t know if the trees are slow because of the poorer soil or if it is from not mowing. The rows in the farm yard are doing great but I mowed them

honestly not sure about mowing, it would probably depend a lot on how consistent you are about it. I mow between my tree rows because it keeps weeds down and I would think less growth between rows would leave more water for the tree roots. It might depend on what you ahve planted more than anything. Some plants are better at competing for water than others are. Plastic I know helps a ton. Ive got some ponderosa that were planted in plastic, and I had some extras soil conservation gave me that I planted with no plastic, and just let them compete with the grass for water. The plastic ones are mostly 4-6ft tall now and the one without plastic are all less than 2ft tall. BTW if you have ponderosa, be careful with nitrogen fertilizer, I fried mine pretty good 2 summers ago, but they all survived, but they lost a lot of leaves initially.