Jiffy
★★★★★ Legendary Member
Ahhhhhh come on!! Fill’er up to the top and scrape it off with a kitchen knife. Jam your bullet in and let her buck!! Pussy…..
I could be wrong but i think when i used to load 30-06 with imr 4350 i probably could have done that and been just fine as the cases were pretty much full to the top. Been awhile so i could be wrong as i used to load some with 3031 i think and a few other powders dad had laying around.Ahhhhhh come on!! Fill’er up to the top and scrape it off with a kitchen knife. Jam your bullet in and let her buck!! Pussy…..![]()
Try that with blue dot and let me know how that is for ya.I could be wrong but i think when i used to load 30-06 with imr 4350 i probably could have done that and been just fine as the cases were pretty much full to the top. Been awhile so i could be wrong as i used to load some with 3031 i think and a few other powders dad had laying around.
I plan to keep shots under 200 yards, because of my rifling issue, Im going to aim for 1500fps so that will help also. Subsonic would have been fun to try, but it will still be pretty quiet with my suppressor. I will be hunting with neighbors close so I want to keep velocity and sound down.Lycan you must have a 178346mm scope with a 10182738moa rail for those corrections!!!!
![]()
That'll be a sweet setup.Pulled the trigger on this last week, $620 with tax, free shipping from Buds. 1/7 twist should stabilize most things at subsonic speed, hopefully. Should be pretty quiet even supersonic with a suppressor. Im aiming for something I can shoot on my 40 acres without bothering the neighbors too much, in a fairly populated rural area outside bismarck.
![]()
Picked up some ammo to play with also, as I dont have dies or brass yet...
![]()
https://sgammo.com/product/300-aac-...ut-125-grain-open-tip-winchester-ammo-red300/
![]()
https://sgammo.com/product/300-aac-...n-txrg-sellier-bellot-exergy-ammo-sb300blkxa/
![]()
https://sgammo.com/product/300-aac-...t-190-grain-subx-hornady-subsonic-ammo-80877/