anyone here know how to wire a trailor??.

[bucksnbears]

need to wire the lights and electric brake system on a travel trailor.
anyone in the F/M area that can do it.
will pay for your time.

i'm dumb as a stump with this kind of stuff;:;boohoo

 

[SDMF]

Assuming you have a truck with a factory installed round 7 and brake controller, the owners manual in your truck should tell you what's what in your round 7.

 

[bucksnbears]

truck has the round plug but ya already lost me on the rest.
as stated..dumb as a stump:;:huh

 

[SDMF]

There is a diagram in your owners manual. It will tell you what position within the 7-pin is for which function and what color wire corresponds to it. The middle post is usually the actual brakes. The 6 wires around it will be for lights. Running lights, brake lights, turn signals. Most of the time the wiring kit for the trailer will have the wires colored the same as the ones on the pickup. After that it's string the wires where you want them using wire loom for anything that's exposed, solder, butt connectors, and heat shrink tubing.

 

[WoodyND]

No problem showing you how to wire the trailer. I own a body repair shop and have done many trailers of my own. Give me a call at 799-8325 and I can show you or help you out.

 

[johnr]

No problem showing you how to wire the trailer. I own a body repair shop and have done many trailers of my own. Give me a call at 799-8325 and I can show you or help you out.

I think old dummy is just wanting you to do it...haha :;: