NDA Ammo and Reloading Component TRADE thread

[Dirty]

This is one of the best threads I’ve seen in a long time.

THIS is the kind of unity this country needs!
Plus we all end up well armed in the end. :;:cheers

- - - Updated - - -

Ammo or projectiles? 6.5MM bullets?

Ammo for 6.5 Creed, 260 Rem, 6.5PRC, 264Win, 6.5-300Wby?

Details people, if you want help, folks gotta know what you actually need.

Your wives and girlfriends probably aren't here so don't expect folks to read your mind.

You might be surprised whose wives and girlfriends show up over here...:;:smokin

 

[Migrator Man]

i have roughly 3/4 lb of H1000 i would be willing to trade was using it to develop a 7mm load and Vit N570 produced better accuracy and velocity so i went that route. i am looking for a 150gr ish .308 caliber bullet tip like a hornady SST or nosler accubond. hell i may even take the traditional soft point. looking to develop a load my my newly acquired short barrel .308 .. i would also trade for new or once fired .308 brass. if the trades prices dont work out i would throw cash in

You can’t find any 30 cal bullets?!?!? Tons available where I am, but I guess might not last long. Maybe not accubonds but many other different 30 cal options.

- - - Updated - - -

I could use some ramshot big game powder. Have some 7mm bullets I could trade

I saw a pound in a local shop around here been sitting awhile. I will try to pick it up. Might be going through Bismarck soon.

 

[SDMF]

You might be surprised whose wives and girlfriends show up over here...:;:smokin

Maybe we're going about this all wrong. Maybe we should be encouraging wives and girlfriends to post up the stuff they'd like to have out of the house........

 

[Enslow]

I have one lb of h4831, 1 lb of varget, and one lb of imr 4064 I would trade for imr-4350.

 

[Kurtr]

I have a bunch of 22 cal hornady 55grn spire points , 55 grn fmj , Winchester 55grn soft points, Sierra 50 grain blitz, Sierra 50 grn spitzer , Speer 45 grn spitzer

6mm 80 grn Speer spitzer, 90 grn fmj, 100 grn Sierra spitzer

100 plus Remington 308 brass

A whole bunch lake city 223 brass

a whole bunch 308 lake city 308 brass

and a whole bunch of shot gun shell hulls I would have to see what those are if any on was interested

 

[ShootnBlanks]

Prob worst timing EVER to get into reloading for myself. Or the best. I dunno. Anyways, I am looking for IMR 3031 if anyone is willing to sell.

 

[jdinny]

You can’t find any 30 cal bullets?!?!? Tons available where I am, but I guess might not last long. Maybe not accubonds but many other different 30 cal options.

- - - Updated - - -
send me a link?

I don’t want anything over 168gr tops. I’m running a .308 with an 18” barrel. To shoot heavy loads I would need a slow brining powder with an 18” barrel I wouldn’t burn all the powder...... I need a light 30 cal bullet. There gone everywhere I have looked and I’ve searched Dozens of sights online and in Bismarck
mandan sporting goods has some berger VLD 155 gr but again not looking for the long range application on this one just a good traditional hunting bullet used 500 and in.


I

 

[SDMF]

Prob worst timing EVER to get into reloading for myself. Or the best. I dunno. Anyways, I am looking for IMR 3031 if anyone is willing to sell.

With all of the exceptional ball powders in that burn rate what sort of masochism causes one to subject themselves to endless trickling of 3031?

- - - Updated - - -

You can’t find any 30 cal bullets?!?!? Tons available where I am, but I guess might not last long. Maybe not accubonds but many other different 30 cal options.

- - - Updated - - -
send me a link?

I don’t want anything over 168gr tops. I’m running a .308 with an 18” barrel. To shoot heavy loads I would need a slow brining powder with an 18” barrel I wouldn’t burn all the powder...... I need a light 30 cal bullet. There gone everywhere I have looked and I’ve searched Dozens of sights online and in Bismarck
mandan sporting goods has some berger VLD 155 gr but again not looking for the long range application on this one just a good traditional hunting bullet used 500 and in.


I

Graf's has 150gn Barnes TSX in stock right now. So does Cabelas.

 

[Mr. Stevenson]

90 rds of CCI Quiet for 50 rds of CCI Velocitor. (all same lot # please)

I'll do 90/40

PM. We'll be using FX or UPS.

 

[Kurtr]

You can’t find any 30 cal bullets?!?!? Tons available where I am, but I guess might not last long. Maybe not accubonds but many other different 30 cal options.

- - - Updated - - -
send me a link?

I don’t want anything over 168gr tops. I’m running a .308 with an 18” barrel. To shoot heavy loads I would need a slow brining powder with an 18” barrel I wouldn’t burn all the powder...... I need a light 30 cal bullet. There gone everywhere I have looked and I’ve searched Dozens of sights online and in Bismarck
mandan sporting goods has some berger VLD 155 gr but again not looking for the long range application on this one just a good traditional hunting bullet used 500 and in.


I

I am pretty sure I have a box of 150 grn nosier ballistic tips and 20 168 Amax and 30 155 bergers

 

[Fracman]

90 rds of CCI Quiet for 50 rds of CCI Velocitor. (all same lot # please)

I'll do 90/40

What grain CCI Quiet?

 

[Mr. Stevenson]

^^^^ 40: Not BS auto-"friendly" 45 which is BS "quiet" with no benefit. Quite loud.

We'd be using FDX or UPS. FDX on my end. PM.

I infer the 45grn is a "collector" rd?

 

[Trapper62]

I’d trade these pound for pound
for TrailBoss or H4350 (H4831 IS GONE)

Would part with these for one of the following, 143 gr. ELDX in .264. Or 50 gr. VMAX in .224

Planning to be in Bismarck this weekend.

 

[Mr. Stevenson]

Posts on this thread should be updated/deleted/rated as necessary as NDA has a similar feature. This is speedy now...

 

[Migrator Man]

You can’t find any 30 cal bullets?!?!? Tons available where I am, but I guess might not last long. Maybe not accubonds but many other different 30 cal options.

- - - Updated - - -
send me a link?

I don’t want anything over 168gr tops. I’m running a .308 with an 18” barrel. To shoot heavy loads I would need a slow brining powder with an 18” barrel I wouldn’t burn all the powder...... I need a light 30 cal bullet. There gone everywhere I have looked and I’ve searched Dozens of sights online and in Bismarck
mandan sporting goods has some berger VLD 155 gr but again not looking for the long range application on this one just a good traditional hunting bullet used 500 and in.


I

Just a local shop, they might even have those 150 grain SST’s, Every other shop in town is pretty much picked over. I’ll go look tomorrow and report back

 

[jdinny]

migrator man, SST's would be perfect actually thats exactly the bullet i would like to shoot out of it. if you find them let me know and we could work something out.
Kurt R the nosler ballistic tip would be in the running too so i will keep that in mind. i dont even have a scope on this gun yet but just trying to take care of the reloading components now. i just need the tips and brass and im ready to rock.

 

[SDMF]

migrator man, SST's would be perfect actually thats exactly the bullet i would like to shoot out of it. if you find them let me know and we could work something out.
Kurt R the nosler ballistic tip would be in the running too so i will keep that in mind. i dont even have a scope on this gun yet but just trying to take care of the reloading components now. i just need the tips and brass and im ready to rock.

1x Fired 308 Brass $25/100:

https://www.oncefiredbrass.com/federal338federalfc.aspx

 

[Riverbottoms]

I have 1.5 lbs of IMR4350 and 3/4 lb of IMR 4831. Would trade for 6.5 brass, .270 130gr sst bullets, .308 150 gr sst , noslor 165 gr ballistics or accu bond s . Or just buy the powder. What ever.

 

[SDMF]

I have been looking for some Alliant Reloader 19 powder/ I have primers to trade

Not exactly what you asked for, but, similar burn rate and available:

https://www.precisionreloading.com/cart.php#!s=in&l=PDV&i=N1608

Nevermind, sold while I was posting.

 

[Kurtr]

Just saw scheels in Sioux Falls has a bunch of federal large rifle primers