Hub Shelters- Must have/need items?

[johnr]

I just purchased the Heat Hog heater. I like that you can tilt it upwards, the parts are easier to access, and the grate is a thicker metal. We will see how it works out throughout the season.
https://heathog.com/product/heat-ho...MI9KmMl5_LggMVbE5HAR3eQQjcEAQYDCABEgJMM_D_BwE

That tilt looks awesome

 

[Shockwave]

It is pretty neat. I am hoping it resolves some of the ice melt in the shelter.

 

[wslayer]

I was looking at those last yr. If the buddy takes a crap, that might be the ticket.

 

[Auggie]

I decked out my big buddy heater. I also bought a bunch of Flame King 1lb refillable tanks. Gonna hit the ice this weekend.

 

[wslayer]

I decked out my big buddy heater. I also bought a bunch of Flame King 1lb refillable tanks. Gonna hit the ice this weekend.

I did get that little fan the other day, moves alot of air. Used it out front of the upright freezer to help defrost

 

[shorthairsrus]

Recommendations for comfortable chairs that don’t take up half the truck bed?

4 legged ice fishing chairs https://www.scheels.com/p/trophy-an...iB78qjCqcaAt0MEALw_wcB&src=hardlines&store=64

in my opinion they are better than the 3 legged especially for us guys that tip the over 200 hundo weight.

 

[johnr]

I did get that little fan the other day, moves a lot of air. Used it out front of the upright freezer to help defrost

I did too, haven't tried it yet, but it seem to lean back at an angle more than I would have guessed. I put the bracket on per instructions. Is it meant to lean back at about a 6 degree angle

 

[wslayer]

I did too, haven't tried it yet, but it seem to lean back at an angle more than I would have guessed. I put the bracket on per instructions. Is it meant to lean back at about a 6 degree angle

Not sure, mine does too. Maybe won't slip out and fall down the ice hole

 

[risingsun]

I did too, haven't tried it yet, but it seem to lean back at an angle more than I would have guessed. I put the bracket on per instructions. Is it meant to lean back at about a 6 degree angle

Put a shim under the heater.

 

[CatDaddy]

Well, if this wasn't Makita it would make me think.....fresh hot coffee on the ice. I know, I know, buy a good thermos. But this is neat.

 

[risingsun]

Oh what the hell. Things just keep getting tougher in life.

 

[wslayer]

I did too, haven't tried it yet, but it seem to lean back at an angle more than I would have guessed. I put the bracket on per instructions. Is it meant to lean back at about a 6 degree angle

Used the fan out fishing today. Pretty impressive.
It does run in reverse when set on the ice

 

[Prairie Doggin']

I did too, haven't tried it yet, but it seem to lean back at an angle more than I would have guessed. I put the bracket on per instructions. Is it meant to lean back at about a 6 degree angle

I moved it down one rung from instructions and it leveled out more...haven't run long term to see if it's "too close" to heat.

 

[CatDaddy]

I moved it down one rung from instructions and it leveled out more...haven't run long term to see if it's "too close" to heat.

Are the clips any good? Mine didn't come with them, bought it 3 years ago and used an angle grinder to modify the base. Works good, just wondering if the clips make life any easier! Pictures of how they interact with the fan and Buddy would help tremendously if someone was so inclined.....

 

[wslayer]

Are the clips any good? Mine didn't come with them, bought it 3 years ago and used an angle grinder to modify the base. Works good, just wondering if the clips make life any easier! Pictures of how they interact with the fan and Buddy would help tremendously if someone was so inclined.....

Clips the fan sits in seem a bit flimsy until actually mounted . I thought they would be sloppy loose but fit firmly and arent going to rattle out.( i sure hope not when get really rough terrain) . Nice addition. . . sorry don't have photo's.

 

[lunkerslayer]

Sweet (ultimate) set up