why aren't they made from stainless?
The thermal conductivity of copper is 20 times that of stainless.
Also $$$!
why aren't they made from stainless?
The thermal conductivity of copper is 20 times that of stainless.
I capped mine just like the sewer skewer and then drilled holes through the horizontal section of the T. Very similar to the sewer skewer. Because of how corrosive H2S gas is, I used heavier copper, soldered al the joints and ran two stainless self screws in at each joint for insurance. Directions on the sewer skewer say to replace them after 2 years but if you look at them they are pretty light copper. Maybe that's the key but I figured mine should be good for atleast 5-years. Maybe I need to redrill and increase the hole sizes in the T? IDK, maybe the lighter copper is the key. in any regard, I still had the one trouble vent freeze up once this year with both the insulvent
and the 12 foot copper T!
why did you cap the ends? I was curious why they did this in the ones sold in store. I left mine open and then drilled holes in the bottoms of the ends
Carefull I fell off my roof checking my vent at end of dec. right leg is severely broken and will be laid up most likely till spring.
and we’re just learning this now?I got thrown from a horse 1 1/2 years ago, knee is still buggered up
The embarrassment of falling off of a horse cuts long, wide, and deep. It takes years to recover from this humiliation,and we’re just learning this now?
inquiring minds want to know -
how fast was your Harley going?
how liquored up were you?
thats all for now - more later
Seen many hunting cowboys when in mountains get hurt not fun
Seen many hunting cowboys when in mountains get hurt not fun
Just speaking native.Seen many hunting cowboys when in mountains get hurt not fun
and we’re just learning this now?
inquiring minds want to know -
how fast was your Harley going?
how liquored up were you?
thats all for now - more later
I was wondering why Kmart had the horse ride taped off....